Guest Post – Homemade Pastrami from Larry at Big Dude’s Eclectic Ramblings
(Please leave a comment below!)
Folks, do I have a special treat in store for you! Larry, from Big Dude’s Eclectic Ramblings has graced the BBQ Smoker Site blog with a guest post covering his most recent homemade pastrami prep and cook. I dare you to look at these pics and not drool on your keyboard. I nearly broke my laptop screen trying to take a bite of that sandwich pic at the end!
Larry, thank you for submitting this post to share with the BBQ Smoker fans who read this blog. As always, if any of you have any posts you’d like to share, please drop me a line via the contact link above and we’ll put it up!
Homemade Pastrami from Larry at Big Dude’s Eclectic Ramblings
First, let me say that I’m flattered at being asked to do a guest post for Kevin here on the BBQ Smoker Site blog, and I invite you to drop by my blog – Big Dude’s Eclectric Ramblings. So let’s get to the pastrami.
I’ve made my own corned beef a few times but have yet to make one I liked any better than what I can by, but when I saw the recipe from Andrew over at Gastro Fun With Andrew, I knew I had to try it. As it happened, the local market had top round on sale which is what I wanted to use for the pastrami because it makes wider slices than brisket. I also bought a couple of chuck roasts to brine for making into something else later (stay tuned for this one). So this is somewhat of a pastrami experiment.
Now back to the corned beef. I used Andrews recipe as written, except substituted a tablespoon of ground cayenne and 1/8 tsp of ground cinnamon as that’s what I had – I made a gallon of brine. I put the three pieces of meat on edge in the bucket and poured in the cold brine and put in the fridge, where the meat was turned every day.
Top Round Trimmed and Ready
Top Round in Brining Bucket
Here it is after a week – I used a plate and jar of water to keep it under.
Top Round in Pastrami Brine Solution
Plate and Jar of Water Weighing Down Meat
I removed it from the brine after 10 days, rinsed it well, and cooked a little piece to test the saltiness.
Trimmed top round after brining
I decided it was too salty so back it went into the green bucket for a 4 hour soak in cold water, with one change of water. Still to salty, so another 4 hour soak.
Brined to round in water soak to draw out excess salt
I timed it to be ready for my next BBQ day, so I rubbed it with my pastrami rub and put it in the smoker at 230 degrees F along with a pork butt and two brisket flats and went to bed – I just love my Stumps gravity charcoal feed smoker and DigiQ controller (works like a home thermostat to maintain temp). Rubbed and ready to go.
Brined top round, excess salt removed, rubbed and ready for a ride in my Stumps Gravity Fed Smoker at 230 degrees-F
Normally, brisket based pastrami is pulled at 175 degrees F, then steamed to finish cooking prior to serving, but since the top round is much leaner and will more likely get tougher with additional cooking, I pulled it at 156 degrees F.
Pastrami after its ride in the Stumps Smoker
I let it rest for about 15 minutes and gave it a try.
Sliced pastrami after a 15 minute post smoke rest
I really liked the flavor, but thought it might still too salty, but I waited to see how it was after steaming, before I made any another decisions about it. I cut it into the two meal sized pieces and put one in the fridge and the other in the freezer.
Pastrami chunk halved into dinner portions
I forgot what day it was (I’m reetired you know) and ended up pulling it from the brine one day early and as can be seen, it did not get corned completly through.
Center portion of pastrami chunk not quite corned through
I don’t know that on more day would do it so next time I’ll go for 12 days. Since it will be kept cold, it is still safe to eat, but it won’t have the corned flavor in that center spot – I fixed that when I stacked it on a sandwich. Since I was in a hurry, I sliced it thin and put it in a pan with a basket and steamed it for about 5 minutes then built the traditional pastrami on rye sandwich and grilled it in a pan with butter.
Pastrami sandwich in the pan for a quick fry
Traditional pastrami on rye with pickles on the side
It was very good and after steaming the salt level was about right for me. Sliced thin, it was plenty tender but, as might be expected, not as moist as brisket based pastrami would be, especially since it was sliced prior to steaming. All-in all, it was a very good sandwich and I’m looking forward to the next one which will be slowly steamed as a chunk prior to slicing.
I hope you enjoyed my little experiment. I invite you to drop by my blog – Big Dude’s Eclectic Ramblings for more tasty BBQ related posts.
Larry
Comment Using Facebook
![]() |
|
No related posts.
Filed under BBQ Recipes, Guest Posts by





















Leave a Comment